fischer - N 6X80/50 steel strike screw and dowel for concrete, Box 200 units

The hammer-in plug for simple, fast and economic installation. Advantages The rapid hammerset installation reduces the amount of time required and allows for an economic series installation. The integrated hammer-in stop prevents the plug from expanding prematurely (jamming), thus enabling a problem-free installation. Together with the cross-slot recess, the thread of the nail screw allows the screw to be removed, thus allowing for subsequent dismantling. The wide range of diameters and usage lengths provides the correct plug for every fixing. The fischer Hammerfix N-S with countersunk head consists of a high-quality nylon plug and a zinc-plated nail screw. These are already pre-fitted for quick assembly. The Hammerfix is led through the component in the time-saving through-type installation. When driving in the nail screw, the fixing sleeve expands and anchors itself securely in the building material. The fischer Hammerfix N-S with countersunk head is ideal for fixing timber constructions in all building materials in internal areas. Applications Substructures made of wood Wall connection or plaster profiles Cable and pipe clips Perforated tapes Building materials Concrete Solid sand-lime brick Building brick Natural stone Solid brick made from lightweight concrete Aerated concrete Solid panel made from gypsum Vertically perforated brick Perforated sand-lime brick Hollow blocks made from lightweight concrete You can find detailed information on building materials in the registration document. Functioning Suitable for push-through installation. When hammered in, the nail screw causes the plug to expand in two directions, thus providing a secure anchoring in the building material. Countersunk head plugs are recommended for the installation of timber constructions; in the case of metal constructions, use flat-head plugs, and use pan-head plugs for long holes. Drill diameter 6 mm Effect. anchorage depth 30 mm Anchor length 80 mm Min. drill hole depth for through fixings 95 mm Max. fixture thickness 50 mm Drive PZ2 Packaging Folding box Amount 200 St. GTIN (EAN-Code) 4048962131215 Load Table pdf, 34.7 KB

• Fast Hammerset installation saves time: ideal for series installation.
• Simple and secure installation: Integrated hammer-in stop prevents premature anchor spreading.
• Subsequent dismantling of the nail screw with a cross-slot recess is possible.
• With countersunk head.
• The rapid hammerset installation reduces the amount of time required and allows for an economic series installation.
• The integrated hammer-in stop prevents the plug from expanding prematurely (jamming), thus enabling a problem-free installation.
• Together with the cross-slot recess, the thread of the nail screw allows the screw to be removed, thus allowing for subsequent dismantling.
• The wide range of diameters and usage lengths provides the correct plug for every fixing.
• Substructures made of wood
• Wall connection or plaster profiles
• Cable and pipe clips
• Perforated tapes
• Concrete
• Solid sand-lime brick
• Building brick
• Natural stone
• Solid brick made from lightweight concrete
• Aerated concrete
• Solid panel made from gypsum
• Vertically perforated brick
• Perforated sand-lime brick
• Hollow blocks made from lightweight concrete
• Suitable for push-through installation.
• When hammered in, the nail screw causes the plug to expand in two directions, thus providing a secure anchoring in the building material.
• Countersunk head plugs are recommended for the installation of timber constructions; in the case of metal constructions, use flat-head plugs, and use pan-head plugs for long holes.